MTA-MODELS
Air
Cooled Thyristor Rectifiers
|
MTA-MODELS
Air
Cooled Thyristor Rectifiers
|
| MTA-MODELS
:
|
|
| Input voltage |
208
- 600V / 60Hz + PE
|
| Single Phase/ 3 Phase |
3
Phase
|
| DC Output Current (max.) |
>1000A
up to 15kA
|
| DC Output Voltage |
>
6V up to approx. 600V
|
| Ripple |
approx.
5 - 7% at full load*
|
| Duty factor |
100%
continuous
|
| Efficiency |
>
80% up to 90 % (according to design)
|
| Protection grade |
NEMA
2 / IP 21
|
|
Adjustment
|
0
up to 100%
|
* < 5% in a defined range with optional smoothing filter
|
TYPICAL
APPLICATIONS:
|
HAND
PLATING
|
|
CORROSION
PROTECTION
|
|
|
PLASMA
TECHNOLOGY
|
|
|
PLATING
ON PLASTICS
|
|
|
CHLORINE
ELECTROLYSIS
|
| CABINET |
 |
|
IMPROVEMENTS:
|
| It is the policy of American Plating Power that each product is subject to continual improvement. The company reserves the right to alter the design of any equipment without prior notification and without the responsibility to update any delivered or in-service equipment and, furthermore, without incurring the responsibility for altering these instructions. In such circumstances it may be found that the equipment detailed herein differs in certain respects from the one supplied. |
|
©
2004 AMERICAN
PLATING POWER, LLC.
13300-56 S. Cleveland Ave., Suite 215, Fort Myers, Florida 33907 (239)275-5877• Fax (239)275-4959 |