MTO-MODELS
Oil-Cooled
Thyristor Rectifiers
|
MTO-MODELS
Oil-Cooled
Thyristor Rectifiers
|
| MTO-MODELS
OVERVIEW:
|
|
| Input voltage |
208
- 600V / 60Hz + PE
|
| Single Phase/ 3 Phase |
3
Phase
|
| DC Output Current (max.) |
>100
A up to 15 kA
|
| DC Output Voltage |
>
6V
|
| Ripple |
approx.
5 - 7% at full load
|
| Duty factor |
100%
Continuous
|
| Surface finish |
Structural
lacquer RAL 7032
|
| Protection grade |
NEMA
12 / IP 21
|
|
Adjustment
|
0
up to 100%
|
| Ambient Temperature |
95
°F
|
| Supervision |
Oil
temperature , overcurrent relay
|
|
TYPICAL
APPLICATIONS:
|
ANODIZING
AND HARD COAT ANODIZING
|
|
ZINC
|
|
|
REFINING
|
|
|
GENERAL
PLATING
|
|
|
DEGREASING
|
| STEEL TANK |
 |
|
IMPROVEMENTS:
|
| It is the policy of American Plating Power that each product is subject to continual improvement. The company reserves the right to alter the design of any equipment without prior notification and without the responsibility to update any delivered or in-service equipment and, furthermore, without incurring the responsibility for altering these instructions. In such circumstances it may be found that the equipment detailed herein differs in certain respects from the one supplied. |
|
©
2004 AMERICAN
PLATING POWER, LLC.
13300-56 S. Cleveland Ave., Suite 215, Fort Myers, Florida 33907 (239)275-5877• Fax (239)275-4959 |