MTW-MODELS
Water
Cooled Thyristor Rectifiers
|
MTW-MODELS
Water
Cooled Thyristor Rectifiers
|
| MTW-MODELS
:
|
|
| Input voltage |
208
- 600V / 60Hz + PE
|
| Single Phase/ 3 Phase |
3
Phase
|
| DC Output Current (max.) |
>1000
A up to 100 kA
|
| DC Output Voltage |
>
6V up to 600 V
|
| Ripple |
approx.
5 - 7% at full load*
|
| Duty factor |
100%
Continuous
|
| Efficiency |
>
80% up to 90 % (according to design)
|
| Protection grade |
NEMA
2 / IP 21
|
|
Adjustment
|
0
up to 100%
|
| Ambient Temperature |
95
°F
|
| Water entry temperature |
60°F
up to 85°F
|
* < 5% in a defined range with optional smoothing filter
|
TYPICAL
APPLICATIONS:
|
ANODIZING
AND HARD COAT ANODIZING
|
|
CHROME
AND HARD CHROME
|
|
|
REEL
- TO - REEL
|
|
|
PLATING
ON PLASTICS
|
|
|
CHLORINE
ELECTROLYSIS
|
|
|
PULSE PLATING
|
|
|
METAL MELTING
|
| CABINET |
 |
|
IMPROVEMENTS:
|
| It is the policy of American Plating Power that each product is subject to continual improvement. The company reserves the right to alter the design of any equipment without prior notification and without the responsibility to update any delivered or in-service equipment and, furthermore, without incurring the responsibility for altering these instructions. In such circumstances it may be found that the equipment detailed herein differs in certain respects from the one supplied. |
|
©
2004 AMERICAN
PLATING POWER, LLC.
13300-56 S. Cleveland Ave., Suite 215, Fort Myers, Florida 33907 (239)275-5877• Fax (239)275-4959 |